The cult classic National Lampoons Christmas Vacation has taught us a lot of do’s and don’ts to follow during the holiday season. For example, you probably should avoid loading up your outlets and extensions cords when setting up your lights. Or we careful with animals and Christmas Tree light cords. While these scenes were funny, they aren’t something you want to deal with personally.So while you begin to decorate for the holidays and add in fun, sparkle and warmth around, it’s important to remember that many of our favorite decorations can carry the risk of fire or electrical injury if not used and installed carefully. Don’t let a preventable accident take the enjoyment out of your holidays – whether you’re excitedly preparing for Christmas, Hanukkah, or Kwanzaa, take a few minutes to read our decorating safety tips. With these tips you can hope to have a happy, healthy and safe holiday season!
Your Christmas Tree
Did you know that your choice of Christmas tree could affect its flammability factor? Older, dried-out trees ignite and burn much faster than those that are freshly cut and well hydrated, so when you’re shopping for a natural (live) Christmas tree, keep the following things in mind:
- Before taking a Christmas tree home, make sure that its needles are fresh, green, and firmly attached to the branches. Bend the needles between your fingers – if they break, the tree is too dry. Also check that the tree trunk’s cut surface is sticky to the touch. As a final precaution, pick the tree up vertically and tap the trunk against the ground; if needles fall off, move on to another tree.
- As a general rule, Christmas trees with thicker needles take longer to dry out, so a robust variety like the Noble Fir is a good choice.
- If you opt for an artificial tree instead, be sure that it’s flame retardant.
Setting Up Your Christmas Tree
The way you set up and care for your tree has a big effect on how long it will last, how beautiful it will stay, and, ultimately, how safe it will be to have in your home.
- Before putting your new Christmas tree into its stand, cut a couple of inches off the bottom of the trunk to expose fresher (and far more absorbent) wood. Taking a few minutes to do this will improve your tree’s water intake, and make it harder for your tree to catch fire.
- Your tree stand should have a capacity of at least one gallon, which is the amount of water that the average 6-foot Christmas tree can consume in a day’s time. As a general rule of thumb, live Christmas trees require one quart of water for every inch of trunk diameter.
- Water live Christmas trees daily.
- Position tree a minimum of 3 feet away from candles, fireplaces, space heaters, radiators, heat vents, and other heat sources.
- Because nearly half of all Christmas tree fires involve electrical malfunctions, it’s extremely important to check that light strands and other electrical decorations are in good condition (free from insulation cracks, fraying wires or damaged bulbs and plugs) before decorating your tree with them.
Lights and Decorations
- Purchase lights, electric decor, and extension cords that are UL-listed
- Make sure that you use lights and decorations that are rated ONLY for outdoor use. Putting indoor-only products outside in the weather can result in electric shock and fire hazards.
- If you’re unsure if the decor is rated for indoor or outdoor use, just check the color-coded UL mark on the product’s package. A green holographic UL mark says, “indoors only, please,” while a red one indicates that the product is safe for both indoor and outdoor use.
- Inspect all lights, electric decorations and extension cords for signs of damage to wire insulation, plugs, and bulbs. If the damage can be repaired (i.e. broken bulbs replaced), do not use the item until the repair has been made. If cords and plugs are damaged, discard and replace the decoration.
- If you need to replace a bulb in a string of Christmas lights, make sure that the wattage rating of the replacement bulb you’re using matches that of the light strand. Using a bulb with too high a wattage can cause the light string to overheat, creating a fire risk.
- Reduce your risk of electric shock by passing up metal ladders in favor of ladders made of non-conductive materials like wood or fiberglass-reinforced plastic.
- Only use lights and decorations in accordance with manufacturers’ instructions.
- Before you begin decorating, verify how many strands of lights it is safe to connect end-to-end (as a general rule, it’s 3).
- Be careful not to overload extension cords. You’ll want to find out the wattage rating of your extension cord, as well as the power requirements of any lights or decorations you’re planning to plug into it. A wattage rating is the amount of electricity that an extension cord is built to carry, and if the combined power requirements (or “pull”) of your lights and decorations exceed that rating, overheating and fire can occur.
Experience You Can Trust, Service You Can Count On!
Don’t worry if you happen to have the need for our carpet cleaning services and are searching for carpet cleaning near me choose TMG Companies. We are a full service residential cleaning company and commercial cleaning company , equipped to keep your home or business in top shape for years to come. Our hundreds of happy clients can testify to the quality of our work, the efficiency of our professionals, and the beautiful clean that they experience. If you’re ready to see how a professional can upgrade your home or commercial building and keep your space sparkling, contact TMG Companies today and schedule a professional cleaning for your home or office or fill out the form on this page and we’ll contact you!
cleaning company near me
janitorial service near me
janitorial service ct
janitorial cleaning company ct
carpet cleaning company ct
carpet cleaning near me
window cleaning company near me
fire damage restoration
water removal company near me